top of page
Glensound Dante 'Devine' speaker

This is a 'Fostex' sized foldback and monitoring speaker, with the fundamental difference of being a Dante POE device, with 4 selectable channels which can be mixed together if desired. The inputs are selected from Dante Controller in the usual way and the unit is driven from GlenController.

Glensound-Green-Logo-Master-300dpi-1024x378.jpg
Hire Glensound Devine Dante Speaker from Absolute Broadcast
Features

  • Audio monitor speaker for Dante/AES67 networks

  • PoE powered so just a single cable connection

  • Monitors 4 incoming Dante/AES67 channels

  • Select between monitoring individual inputs, pairs, or all 4 inputs

  • Set priority override on one input to interrupt another (paging over programme audio for example)

  • Set EQ mode for music or voice priority

  • LF Cut

  • Gain boost

  • Lock all functions or adjustments for security

  • All LEDs can be set to dark mode for use in black out areas

  • Front input select LEDs can be set as a PPM meter

  • Each individual input LED can be set as a tricolour single LED meter for that input

  • Configuration screen on rear

  • VESA 75mm bracket and mic arm mounting options

  • Remote control across network using GlenController

  • Upgrade individual or batch Divine units across a network with GlenController 

Rent Glensound Dante Speaker Rear view

Divine is a new concept in powered network audio monitors. It is housed in a hardwearing fully sealed diecast enclosure, is powered by Power over Ethernet (PoE) and boasts the very latest low noise high output class D power
amplifier.

Internally a Digital Signal Processor (DSP) takes careful care of the audio signals, including state of the art compression and limiting circuits, while a microprocessor provides full setup and control via a small rear panel LCD. Control of setup and day to day operation of the Divine will also be available on our Windows 10 application GlenController including the ability to group multiple Divines together and control their level simultaneously.

Divine can receive up to four* Dante (AES67 compliant) audio over IP (AoIP) inputs.  These inputs can be selected by the user on a large clear front panel select switch.  The four audio inputs can also be easily mixed together and their individual levels adjusted.

​

​A priority system is provided to allow one (or more) of the inputs to automatically duck another. This can be very useful if you want to monitor one source but also listen to another when audio is present, such as sending show relay to dressing rooms in a theatre but having the stage manager's call and building fire alarm take precedence when they’re active. 

The diecast enclosure has been carefully designed to provide full protection of all control knobs, switches and ports to prevent damage. Uniquely, the housing also features a standard PC screen Vesa mount, meaning that you can purchase any standard Vesa mounting solution to hang/ mount your Divine on, saving you lots of money. Standard microphone stand threads are also provided in the base for an alternative support solution.

Different preset EQs and an LF cut can all be set in the user menu to allow the Divine to be used for a variety of applications.
Divine is so much more than just another powered loudspeaker. 

Description
bottom of page